Melt Flow Indexers

MI-40


The Melt Flow Index mi40 with automatic weight selection can carry out tests according to ISO 1133 and ASTM D 1238, procedures B, as well as ISO 1133 and ASTM D 1238 procedure C for the “Half Height / Half Diameter” standard. In addition, it runs tests according to procedure D for the FRR test (Flow Rate Ratio) and ASTM D 3364.

Due to force controlled compressing with up to 60kg the comparability is reaching a new standard. An additional advantage of the mi40 is the multi-load measurement with up to 8 different weights, which are operable in a descending and ascending mode. Therefore, it is possible to compare the mi40 to a measurement unit which is similar to a capillary Rheometer.

REQUEST A QUOTE

  • Force controlled pre-loading / ejection via drive and test weights
  • Multi-load tests with up to 8 different weights, ascending, descending or freely selectable
  • High-precision timer with a resolution better than 0.001 s
  • Temperature control algorithm, resolution 0 to 320°C: 0.01°C, 320 to 500°C: 0.1°C
  • High-resolution position transducer to measure volume output
  • Automatic computation of resolution
  • Mobile rheology with the miAPP via modern web browser on a tablet or PC

TOP