Precision Premier II Ferroelectric Tester


The Precision Premier II is an advanced tester that has a large test envelope in terms of frequency response, voltage range and accuracy. The Premier II has a fast hysteresis frequency rating of 250KHz at +/-10V built-in to the system. The Premier II execute tests to 100 kHz below 10 Volts, making it useful for both bulk and thin film capacitors. The Premier II is capable of measuring thin ferroelectric film capacitors down to 0.1 square microns. Using up to 32,000 points with 18-bit resolution. The Precision Premier II II is offered with a variety of internal amplifiers. The Precision Premier II is offered in a ±10V, 30V, 100V, 200V, and 500V built-in drive volt option. The Precision Premier II can be expanded to 10kV with the addition of a high voltage interface and amplifier. The Premier II tester makes testing of thin films and bulk ceramics a fast and simple process.

REQUEST A QUOTE

Tester Parameter Premier
Voltage Range (built-in drive voltage) ±10V, ±30V, ±100V, ±200V or ±500V built-in
Voltage Range with an external amplifier and high voltage interface (HVI) 10KV
Number of ADC Bits 18
Minimum Charge Resolution 0.80fC
Minimum Area Resolution (assuming 1 ADC bit = 1μC/cm2) 0.080μ2
Maximum Charge Resolution 5.26mC
Maximum Area Resolution (assuming saturation polarization = 100μC/cm2) 52.6cm2
Maximum Charge Resolution with High Voltage Interface (HVI) 526mC
Maximum Area Resolution (assuming saturation polarization = 100μC/cm2) w/o HVI >100cm2
Maximum Hysteresis Frequency 250KHz @ 10V
50KHz @ 30V
50KHz @ 100V
50KHz @ 200V
2KHz @ 500V
Minimum Hysteresis Frequency 0.03Hz
Minimum Pulse Width 0.5μs
Minimum Pulse Rise Time (5V) 400ns
Maximum Pulse Width 1s
Maximum Delay between Pulses 40ks
Internal Clock 25ns
Minimum Leakage Current (assuming max current integration period = 1 seconds) 1pA
Maximum Small Signal Cap Frequency 1MHz
Minimum Small Signal Cap Frequency 1Hz
Output Rise Time Control 105 scaling
Input Capacitance -6fF
Electrometer Input All Test Frequencies for all test at any speed Yes
* The minimum area resolution under actual test conditions depends upon the internal noise environment of the tester, the external noise environment, and the test jig parasitic capacitance.
*** Tester specifications are subject to change without notice.

TOP